This is a project we completed on a hotel to upgrade the look of the Elevator lobbies
We added a one piece chair rail and a crown molding. We installed new Vinyl wallcovering above and below the chair rail to give it a two tone color scheme. The chair rail and crown give the elevator lobbies a lot of character, but it also has a practical application as well, this high traffic area had some wall damage from guests moving their luggage carts in and out of the elevators, the chair rail creates a buffer to keep the carts off the wall
This is a project at a high end hotel in Raleigh NC where We completed repairs in multiple rooms where mildew growth was forming under cover of vinyl wall covering
This picture shows the mildew growth behind the wallcovering
This picture shows the wall as we begin to remove the damaged gypsum panels, this wall is a concrete wall that has drywall glued and nailed to it, and concrete by nature absorbs moisture which in humid conditions can promote mildew growth.
This picture shows a piece of vinyl wall covering that had actually fell off the wall due to mildew growth below
This picture shows the wall after we began to demo the drywall panels, notice the mildew growing on the back side of the opposing room’s wall.The opposing wall was treated with mildewcide to try and eliminate any further growth
This picture shows one of the rooms after the repairs were completed
This is from a project we completed at a high end hotel near the Crabtree Valley area of Raleigh NC
These pictures show a window wall with water damage caused by an exterior facade leak. The moisture penetrated the wall cavity over a period of time, allowing mildew and mold to grow within the wall; this eventually penetrated the drywall and began to loosen the wallcovering
This mildew continues down the walls from the window walls growing virtually undetectably behind the vinyl wallcovering
This is a close up picture of the mildew/mold growth growing on the face of the drywall
This picture shows how we begin remediation,once the exterior leak was properly addressed, we remove all damaged vinyl, drywall and insulation, pack the contaminated materials into black sealed bags and then discreetly removed them from the hotel. We repaired any damaged framing, treated the studs and opposing walls with a bleach solution to help prevent future mildew growth. We then replaced the insulation, install new mold resistant gypsum panels, after the drywall has been finished we treated all new walls with a low VOC primer with a mildewcide additive. Once the walls are complete and ready for wallcovering we install new vinyl yard goods, the wallcovering adhesive we use is a heavy duty, clear, strippable paste which also has a mildewcide additive. These mildewcide additives are used to help restrict and new mildew/mold growth.
This is a picture of the finished product after all repairs are completed.